BACK TO: POWERLIFTING / WEIGHTLIFTING STORE
The olympic bars
The best for both
The olympic bar differs from the normal ones in that its weight is usually 20 kg, are longer (with measures on the 2.2 meters) and have ends with a diameter of 50 mm (to place olympic weights, the inner diameter of the discs is usually larger than that of standard discs).
We can find the olympic bars in many
There are also professional Olympic bars and calibrated. The olympic bar is compulsory in competitions of strength sports, such as
They are usually made of sturdy steel, capable of withstanding high quantities of weight (especially the competition ones). Some bars are chrome.
Ideally, especially for
The bar is used to do the exercises of different disciplines bodybuilding,
The olympic bar can have different measuresThere are bars from 1.2 m to 2.4 m in some cases. Shorter bars are normally used in
In a olympic bar, the central part (where it is gripped) has a smaller diameter than the ends (where the discs would be placed). This central area usually measures between 25 mm and 50 mm (as is the case of the Apollon bar: a special type of thicker bar to strengthen the forearm). Normally, the grip zone is about 28 mm.
They usually feature a knurled and roughened grip, which feels rough to the touch. This is to improve the lifter's grip.
At the ends of the bar discs are placed or removed. These ends are made of 50 mm the diameter of the Olympic discs is usually between 50 mm and 51 mm.
After the discs have been placed, they are secured by means of the closures o buffers security. The closures prevent the discs from slipping or slipping off and falling out. They must have a diameter that fits the 50 mm diameter of a olympic bar. They allow the athlete to make a much safer lift without force decompensation. The closures competition weights weigh about 2.5 kg and count towards the total weight lifted by the athlete.
The bar
Bar
On the other hand, the lifting of
A olympic bar of
These are the specifications and dimensions of the bar
The bar
These are the specifications and dimensions of the
The
The bars
Before buy a bar
-The bar
-One of the differences is that the bar has marked the grip zones to carry out the olympic exercises specific to
-BearingsThis is another of its characteristics. The bar
-ElasticityThe bar must be able to act as an "elastic", bending and deforming when subjected to high loads and then returning to its normal straight position. A good olympic bar should bend under weight but not become permanently deformed. It must be flexible, this feature improves the lifts.
-It is also important that it is strong enough to be dropped from above the head.
The olympic bar from man measures 2.2 meters and has a weight of 20 kg. It has ends of 50 mm diameter to fit Olympic discs and a grip diameter of 28 mm. The grip zone usually measures 1.31 m. The grip zones of the bar
It is similar to that of men. However, the bar
In the store you can buy both types of bars of
At
To be considered for buy a bar of
The shells of a bar
-The grip marks in a bar
The IPF has the following requirements: the bar must have a grip diameter of between 28 mm and 29 mm, be no more than 2.2 meters long and its central area must be between 1.31 m and 1.32 m. The knurling of a iPF approved bar cannot be coated in chrome. Must weigh 20 kg (only the olympic bar) and 25 kg with safety latches on. 2.5 kg each.
The total weight to be lifted varies according to the exercise and the discs used. It depends on whether the lift is
- In the
- The
- Some exercises of strongman are made with olympic bar squats y
- In sports
- The strength training bars in
- For strength training in
Apart from the classic long rods, there are a multitude of different rods that we can buy. Some of them are olympic bars are cheaper and others have a price higher. It all depends on the type of bar, whether it is professional or not, resistance, bearings, etc.
- TECHNICAL BAROlympic bars: they are generally light Olympic bars with weights between 7 kg and 15 kg. They are used with technical discs and are used by beginners and young athletes to get started in lifting. They can be found in
-
-
-
- SZ BARThis bar can be used to work with biceps y triceps with free weight. It has a special grip shape that takes stress off the wrists. Its Olympic version is usually larger and heavier than standard bars.
-
- DUMBBELL BARS: allow you to build
-
-
- MULTI-GRIP OLYMPIC BAR: similar to a Roman bar but with many more grips.
Others accessories for olympic bar that we can buy in the online store include supports to place olympic bars (vertically or horizontally), pads for
-
Undoubtedly one of the best olympic bars that we recommend buy, is that of the brand Eleiko. Made in Sweden and with a great quality and resistance. We have available the whole range: technical bars, as well as training and competition bars.
For
-Powerlifting
-Weightlifting Bar: started, loaded,
-Bodybuilding
One Olympic bar 150 cm of extreme quality, finished in Hard (Crome of great hardness). With 4 bearings: 2 at each end.Disc Diameter: 50 mm (for Olympic disk).Weight 12 kg. Capacity: 450 kg cargo.Free Shipping.
Barra Z professional pot Olympic disks. For exercises like biceps curl or French press. Disc diameter: 50 mm.grip diameter 28 mm.Load capacity: 225 kg.
Olympic bar much stronger and resistant than other modelssince it is manufactured in steel with a special hard chrome finish (Hard Chrome) highest quality. Learn how to exercise biceps curl.4 bearings.120 cm long.9 kg weight.Free Shipping.
You can do this. Roller any Straight bar to support it on neck to do sitting The protector avoids direct contact with the bar, which can be painful. NBR rubber coated Oxford fabric.40 cm long.
Basic steel support to save Olympic bars of different sizes. Store the rods vertically makes the bars less spaced.Grey color.With 8 spaces for Olympic bars.Free Shipping.
Professional support con capacity 8 bars. This support has 2 pieces and has to anchor to the wall. Allows to better organize the space when saving the Olympic bars of you gym. It's strong steel.Includes anchoring tourillery. With rubber protections to support bars.It has 4 screw zones in each piece.Free Shipping.
Olympic collar clasp to keep the Olympic discs fixed on the bar.For Olympic bars 50 mm diameter.PVC.Price per pair.
Support to keep the bar fixed to the ground and be able to exercise paddle to back. PROFESSIONAL USE. Valid for 30 mm bars.Valid for 50 mm bars.Free Shipping.
_ Agarre special to perform musculation exercise rowing in tip or row in bar T. It is non-slip and is made of EVA rubber.Valid for the Olympic bars of 50 mm.Learn to perform this exercise here..
BARRA ROMANA MULTIAGARRES (OLÍMPICA - 50 MM)It's like a Roman bar but with more variety of grips: neutral and diagonal and with different widths for a wider or narrower grip. Perform several exercises such as the hammer curl, the French press, bench press neutral grip, oars, etc.For Olympic disks 50 mm.You're welcome.
HALTEROFILIA PROFESSIONAL COMPETITIONProfessional Olympic Bar for the practice of weightlifting. It can also be used in other sports that require bounce exercises like crossfit. This product is of great quality.Measure: 28 mm wide x 2200 mm long.For Olympic disks 50 mm diameter.20 kg.You're welcome.
BARRA OLÍMPICA (ACERO)Par steel topes for the Olympic bar. They get fast. Price a couple.