PROFESSIONAL BANK PRESS COMPETITION AND SEAT RACK

PROFESSIONAL BANK PRESS OF COMPETITION AND RACK DE SENTADILLAS

Combines a rack and a bench press competition. The model ATX is a competition weight bank 2 in 1, designed and manufactured specifically for professional use: squats and chest press.

Its extremely robust and stable construction impresses with a weight of 238 kg for the full rack with bank, and 124 kg only for the rack squats without security supports.

The frame is made of steel tubes with dimensions of 8x8cm, 7x7cm and 5x5cm, with wall thicknesses of 3mm and 4mm.
The support can be quickly adjusted to almost any height. For transport, the support take off in a few simple steps.

- Certificate according to standard EN 20957 I.II.IV Class S -
Quality products designed in Germany.

Support with telescopic adjustment:

The central piece the structure are the two telescopic supports that can be adjusted in height and inclination.
Each of the trays has two J-shaped hooks, the bottom is normally used for the bench press and the superior for squats.
On the hooks on J, the cylindrical rollers mounted rotary are integrated to easily align and focus the bar. They are made of a PA material, and are equipped with needle bearings. If necessary, the bearings are interchangeable.

The rollers of the upper J hooks are provided with a centered slot, the lower J hook rollers are cylindrical.
The height of the hooks in J for bench press 755 mm to 1330 mm.
The height of the hooks in J for squats is 1175mm to 1150mm. In each case until the bottom edge of the bar.

Plus, the hooks in J are equipped with an impact protection to protect the grinding of the Olympic bars.
The telescopic adjustment is equipped with PA protections, to facilitate adjustment and protect the material.
The width between telescopic shelves is 110 cm.
Telescopic shelves of the bars can be placed straight or inclined to 6.5o to allow the athlete to hold the athlete bar with a wide grip.

Lever arm lifting system:

The height adjustment is made through a lever arm lifting system. The arm lifting system allows you to adjust the bar height without having to remove or download the weight.
The adjustment grid is 2.5 cm and can be easily reproduced with laser cutting scales.
The delivery includes 8 locking and lifting screws (4 of them as a reservation). Lock pins are automatically secured against drops when discounts are stored.
The bolt necessary for the lifting can be stored directly on the lever arm.

Press Bank and its supports:

The bank and the pedestal are autonomous components and can be mounted and removed from the rack in a minute alternating between squats and bench press.
To loosen and place them, only two clamping knives are needed, which are provided with a thick and robust thread, and should only be slightly loose to separate the pieces.

The bank has a rest surface of 122cm long and 30cm wideAnd one height from the floor of 45cm.

The leather synthetic synthetic synthetic synthetic synthetic synthetic is a special design with an extremely adhesive and non-slip surface.
Each platform has 75cm long and 25cm wide at a height of 18cm on the ground.
The size of the pedestals allows the assistant or spotter to be positioned optimally and, together with the perforated surface, ensures a safe base.

The competition bank has support security:

Them supports of safety can be connected or disconnected to the rack with a simple button clamp. The plug connection ensures an absolutely safe connection.
Security supports are equipped with bar protectors with integrated "Face Safer" and a barrier against poles to avoid the dangerous slide of bars.
The length of the security supports is 66 cm. measured from the post. The distance between security supports It's 114cm.
The lowest height is 61.5cm and the maximum is 89cm from the ground to the upper shelf.
The adjustment grid is 2.5cm and has a laser cutting scale to facilitate the reproduction of the adjustment heights.
The telescopic section is equipped with PA sliders to facilitate adjustment and protect the material.

Why buy a bench press competition?

La competition banking is the ideal for those who practice and compete in powerlifting. Training in a professional competition banking allows you to move heavy kilages with total sunny and without damaging the structure of the bank. Besides, if you compete, you'll get used to working in a bank like the ones you'll use in championships. 

The main advantage is the great durability offered by this bank. With it you will be able to train for many years and you will raise more weight than in a normal bank. For advanced powerlifters and presbyters, we certainly recommend a competition seat, as it is a totally amortized investment thanks to the advantages it entails.